Wing gate/swing gate
Wing gate/swing gate
Access gate is an intelligent access management equipment developed and produced by our company for many years.
    Product Description

    The gate is an intelligent access management equipment developed and produced by our company for many years. This equipment organically integrates mechanical, electronic, microprocessor control and various reading and writing technologies. By configuring various read-write devices, using reliable safety protection devices, real-time alarm system, direction indication and control ESD test system, the ESD control, intelligent control and management are jointly coordinated. The equipment is made of stamped stainless steel, which looks beautiful, elegant, rust proof and durable. Besides, standard electrical interfaces are used externally, which can easily integrate the fingerprint machine, ID card, IC card and other card readers on the equipment, providing a civilized and orderly way of access for people in and out, and preventing illegal people from entering and leaving at the same time; In addition, the system is specially designed to meet the fire protection requirements. In case of emergency, the system can ensure that the passageway is unobstructed to facilitate the timely evacuation of personnel.


    afsdasd_看图王.jpg


    Functional features


    1:7 inch LCD displays various statuses and data.

     

    2: Directly detect the actual resistance of human hands and feet to the ground, and upload it to the background management system in real time through the LAN.

     

    3: You can freely set the access permissions of personnel.

     

    4: The background system will link with the attendance system , and automatically sending email of the untested personnel information

     

    5: Double circuit wrist strap test.

     

    6: It has zero self check function, which is convenient for users to maintain and use.

     

    7: Auto alarm function of illegal entry.

     

    8: Anti impact function. When the opening signal is not received, the expansion plate (swing arm) will lock automatically

     

    9: Infrared/mechanical double anti pinch function, when the expansion plate  (swing arm) is blocked during resetting, the motor will automatically stop working within the specified time, and the force become very small, and an alarm signal will be sent out at the same time.

     

    10: It has the automatic reset function. After the reads the people’s valid card and passes the test, if the people does not pass within the specified time, the system will automatically cancel the people's passing permission this time.


    Troubleshooting and routine maintenance


    1: The card is detected OK, but the system does not open the gate ,and there is no response, or it does not open automatically after power off. Please recheck  whether the opening signal wire on the motherboard has fallen or has poor contact, and then plug it again.

     

    2: The working status of the direction indication is: the green arrow points to the left, the right, or the red cross. If the direction indication does not respond, or the direction indicated is incorrect. You can switch to another machine to test and try it with a good switch. Recheck the wiring

     

    3: The access gate has an automatic opening function after power off. If it does not open after power off ,  the voltage of the backup battery (storage battery) inside maybe not enough, and measure whether the voltage is above 10V by multimeter.

     

    4: After swiping the card, one of the access gates is opened, while the other is not. Recheck whether the synchronization wire is connected properly. Make sure well connecting, check whether the motherboard of the one that cannot be opened has received the ON signal. If not, recheck whether the wiring has fallen and whether the plug on the motherboard is plugged in properly.

     

    5: After swiping the card, the gate is opened but not closed. In this case, the anti pinch infrared sensor in the middle is not alignment. Before fixing the chassis, make sure the infrared sensor is properly ailgned , so that the door can be opened and closed normally. If the infrared sensor is not properly aligned, there will be alarm reminder after power on. Please follow the direction arrow after swiping the card.

     

    6: The two gates are not opened synchronously during linkage: check the linked wire for looseness or poor soldering.

     

    7: After opening the gate by swiping the card, the gate can only be opened after the access control board is closed: enter the menu to change the type of the gate opening signal to high-level opening.

     

    8: The gate is not closed for a long time after it is opened

     

    8.1: Check whether the opening duration of the entrance and exit is set too long (see the operating instructions for system parameter setting).

     

    8.2: Check whether the black output signal terminal of the anti pinch infrared switch is 12V voltage (0V at normal status ), if not ,the transmitting or receiving end of the infrared switch is damaged.

     

    9: Alarm when people passes through the gate

     

    9.1: Check whether the opening duration of the entrance and exit is set too short (see the operating instructions for system parameter setting).

     

    9.2: Check whether the in and out infrared sensor switches are wrongly connected, that is, the entrance infrared sensor switch signal is wrongly connected to the exit signal, and the exit signal is wrongly connected to the entrance signal, which will trigger alarm.


    Specifications


    36.jpg


    Appearance &size


    微信图片_20230105170258.jpg

    微信图片_20230105170303.jpg

    Copyright © 2017 Shenzhen Yessys Industrial Technology Co., Ltd.
    Call up QQ Service Products Feedback